RTK Dongle Configuration (0x0E,0x10)
| Description |
Configure the communications with the RTK Dongle connected to the device. |
|
| Notes |
|
|
| Parameter Name | Data Type | Description |
| Field Length | u8 | 7 |
| Descriptor | u8 | 0x10 |
| Function Selector | u8 |
This command supports the following MIP function selectors:Write Read Save Load Default
[WRSLD]
|
| Enable | u8 | 0 - Disabled, 1- Enabled |
| Reserved | u8[3] | |
| Response Data | Data Type | Description |
| Response Length | u8 | 6 |
| Response Descriptor | u8 | 0x90 |
| Enable | u8 | |
| Reserved | u8[3] | |