PPS Source (0x0C,0x28)

Description

Controls the Pulse Per Second (PPS) source.

Notes

Parameter Name Data Type Description

Field Length u8 4

Descriptor u8 0x28

Function Selector u8 This command supports the following MIP function selectors:
Write Read Save Load Default [WRSLD]

Source

u8 enum

Name	Value	Description
DISABLED	0	PPS output is disabled. Not valid for PPS source command.
RECEIVER_1	1	PPS is provided by GNSS receiver 1.
RECEIVER_2	2	PPS is provided by GNSS receiver 2.
GPIO	3	PPS is provided to an external GPIO pin. Use the GPIO Setup command to choose and configure the pin.
GENERATED	4	PPS is generated from the system oscillator.

Ack/Nack Reply See standard MIP ack/nack reply format.

Response Data Data Type Description

Response Length u8 3

Response Descriptor u8 0xA8

Source

u8 enum

Name	Value	Description
DISABLED	0	PPS output is disabled. Not valid for PPS source command.
RECEIVER_1	1	PPS is provided by GNSS receiver 1.
RECEIVER_2	2	PPS is provided by GNSS receiver 2.
GPIO	3	PPS is provided to an external GPIO pin. Use the GPIO Setup command to choose and configure the pin.
GENERATED	4	PPS is generated from the system oscillator.